WDM · EoMPLS · Dark Fiber · Wide-area transport
anyWAVE
anyWAVE connects geographically distant locations using optical WDM transport, dark fibre or Ethernet. Capacity, latency and protection depend on the agreed technology and configuration.
- WDM up to 100 Gbps · nX LAG
- Dark fibre: IRU, lease or CAPEX
- EoMPLS · MTU up to 9000
- National and international routes
Complete wide-area transport
From the physical layer to a managed service
Four products covering the full transport chain, from passive fibre to turnkey Ethernet services.
anyWAVE Alpha
- Preliminary analysis, technical design and feasibility study
- WDM transport activation between points A and Z
- Ethernet handoff: 1G, 10G or 100G
- Dedicated, guaranteed point-to-point bandwidth
- Latency defined and measurable on the agreed route
- MTU verified across handoff interfaces and endpoint equipment
- Service monitoring and operational fault management
- Warian technical support with an 8-hour SLA
- nX LAG: interface aggregation to increase capacity; physical route diversity is specified separately
- Active/backup protection on WDM architecture
- Active/active LAG aggregation as specified in the design
- National or international routes
- Dedicated configurations for DCI, backhaul and PoP fan-out
- Tailored design for capacity, resilience and geography
Why choose Alpha for DCI: WDM transport provides dedicated optical capacity for data centre interconnection. Latency, MTU and protection must be checked against the route, handoff interfaces and equipment, according to replication and clustering requirements.
- SLA: 8 hours
- Delivery: 40–180 days, depending on complexity and geography
- MTU according to the agreed interfaces and configuration
- Scales from 1G to 100G+ through LAG
- Order subject to feasibility study
anyWAVE Omega
- Preliminary analysis and technical infrastructure feasibility study
- Route design and infrastructure sourcing or construction
- Dark fibre availability between points A and Z
- Operational coordination of activation and handoff
- Warian technical support within the service scope
- Administrative and contractual management of the underlying infrastructure agreement
- Handoff: optical distribution panel at points A and Z
- IRU (Indefeasible Right of Use) — long-term usage rights over existing third-party infrastructure
- Lease — recurring fee for third-party infrastructure
- CAPEX build — construction of the route as part of the project
- One fibre pair or multiple pairs where available
- Terrestrial routes: 4–8-hour SLA / submarine routes: 72-hour SLA
- National or international routes
When to choose Omega: for full transmission-layer freedom: choose your own equipment, WDM technology, muxponders and future capacity without being tied to a pre-lit service. Passive fibre is the foundation for your optical solution, built by you or by Warian through anyWAVE Alpha.
- Terrestrial SLA: 4–8 hours
- Submarine SLA: 72 hours
- Pricing: per linear metre plus project variables
- IRU available for up to 20 years
- Terrestrial and submarine routes
anyWAVE Lite
Ethernet transport over an MPLS backbone. Transparent Layer 2, MTU up to 9000 and a cost-optimised POP2POP option.
- Preliminary analysis, design and feasibility study
- EoMPLS (Ethernet over MPLS) transport activation
- Ethernet handoff at both endpoints, A and Z
- Transparent Layer 2 transport over point-to-point pseudowires
- MTU up to 9000, subject to end-to-end jumbo frame validation
- Integration with Warian's wide-area network
- Operational service management and fault handling under the SLA
What EoMPLS means: Ethernet frames are encapsulated and carried across MPLS using point-to-point pseudowires. You receive a transparent Ethernet service at each end, as though connected by a direct cable, without managing the underlying MPLS network.
- POP2POP option — ideal for interconnecting existing Warian nodes
- National or international configurations where available
- Extend other Warian services geographically
- Tailored designs for specific capacity and scope
- POP2POP SLA: 4 hours
- Standard SLA: depends on the access scope
- Jumbo MTU up to 9000
- POP2POP: optimised cost and delivery times
anyWAVE IXR
allocation model
- EoMPLS transport with self-protected architecture
- Handoff to a remote IXP where Warian is physically present
- Access the IXP fabric without installing equipment in its host data centre
- Jumbo frame support
- Pricing aligned with the destination IXP's allocation model
- No colocation costs at the IXP data centre
- No extra equipment to install or manage remotely
- Remote IXP connectivity for the customer’s peering agreements
- Use Warian's established presence at major Italian and European IXPs
Available IXPs: IXR connects to IXPs reachable through Warian’s presence, subject to a destination feasibility check. The IXP port, membership and agreements with participants remain subject to the scope specified in the order.
- IXP access without remote colocation
- Self-protected architecture
- Order subject to feasibility study
How to order
Every project starts with a conversation.
anyWAVE is project-based infrastructure. Every route is different. Before an order, Warian assesses the path, available technology and best options for your requirements.
Feasibility study
Tell us your endpoints, bandwidth requirements and how the connection needs to work. Warian will assess the right solution.
Technical infrastructure assessment
Warian assesses the route, available infrastructure and partners. Complex routes may take a few days to evaluate, but this ensures the proposal is practical and deliverable.
Technical and commercial proposal
If feasible, we send a detailed proposal covering the technical solution, activation times and pricing.
Confirmation and activation
Once you accept the proposal, design, implementation and testing begin.
Compare plans
Which service is right for you?
Choose according to the control you need at the transmission layer and your specific use case.
| Alpha | Omega | Lite | IXR | |
|---|---|---|---|---|
| Technology | Active WDM | Passive dark fibre | EoMPLS | EoMPLS |
| Handoff layer | Ethernet (optical L1/L2) | Unlit fibre (L0) | Ethernet L2 | Ethernet L2 to IXP |
| Active / passive service | Active, already lit | Passive dark fibre | Active EoMPLS | Active EoMPLS |
| Capacity | 1G / 10G / 100G · LAG nX | Depends on transmission equipment | Configurable per project | Configurable per project |
| MTU | According to interfaces and design | Unlimited on passive fibre | Up to 9000 (jumbo) | Jumbo frames supported |
| Latency | Defined for the agreed route | Deterministic, equipment-dependent | Depends on the MPLS network | Depends on the MPLS network |
| Available protection | WDM/LAG as designed; physical diversity specified separately | Physically diverse routes | Self-protected MPLS architecture | Self-protected |
| Contract model | Managed service | IRU · Lease · CAPEX | Managed service | Managed service |
| SLA | 8 hours | 4–8h terrestrial · 72h submarine | 4h POP2POP · variable otherwise | Agreed per project |
| Main scenario | DCI, backhaul, high-capacity Warian service extension | Full physical-layer control, foundation for your own WDM | Efficient wide-area L2, POP2POP and network extension | Remote IXP access without colocation |
| Design complexity | High | Very high | Medium, simpler with POP2POP | Medium |
Who anyWAVE is for
For those who build networks
anyWAVE is designed for telecoms operators, ISPs, data centres, system integrators and businesses needing high-capacity wide-area transport. If you manage critical networks, it’s built for you.
Telecoms operators and ISPs
Cloud and data centre providers
System Integrator
Multi-site enterprises
Private Layer 2 connections between campuses, operational sites and data centres, with guaranteed bandwidth and low latency.
Regional carriers and backbone operators
Universities and research centres
anyWAVE is high-performance wide-area transport infrastructure connecting data centres and networks with guaranteed bandwidth, predictable latency and scalability.
Frequently asked questions
Find your answers
Is anyWAVE Alpha an Internet service?
What's the difference between Alpha and Lite?
Alpha uses WDM optical transport with dedicated capacity. Latency and MTU depend on the agreed route and interfaces; protection and physical diversity are defined in the project. Lite uses EoMPLS over the Warian MPLS network and supports an MTU up to 9000 following end-to-end verification. SLAs apply to the service and scope specified in the order.
How is the MTU defined on Alpha?
What is dark fibre, and when should I choose Omega?
Dark fibre is installed optical fibre without active transmission equipment. anyWAVE Omega provides the passive route between A and Z, leaving you, or Warian acting for you, free to choose WDM equipment, wavelengths and protocols. Choose Omega for full transmission-layer control, reuse of existing equipment or independent capacity expansion over time.
How is protection implemented on Alpha?
How are SLAs defined for submarine routes?
Can I order anyWAVE directly through anyX without a feasibility study?
What are the delivery times, and what affects them?
More Warian services to help your business grow
anyCLOUD
anyBIZ
High-performance connectivity from 10 Mbps to 100 Gbps on a pan-European backbone.
BGP IP Transit, dedicated access and guaranteed SLAs for businesses that need reliability and continuity.
anyFOUR
anyNET
Multi-technology wholesale access on one platform, with Core Layer 2 handoff or Zero managed Layer 3 termination for ISPs and resellers.
anyVOIP
anyWAN
A managed private network connecting sites, remote users and cloud.
Encrypted tunnels over compatible Warian or third-party connections, subject to technical assessment, with design, deployment and continuous monitoring.
anyWAVE
Start with a feasibility study
Have a route in mind? Let's talk.
- Free feasibility study
- Tailored design
- National and international routes